Ulead PYRO1394DV Especificaciones descargar pdf (Pagina 53)

TASCAM

US-428

VIDEO & AUDIO EDITING

252

www.bhphotovideo.com

PHOTO - VIDEO - PRO AUDIO

Digital Audio Workstation Controller/USB Interface

The US-428 is a 24-bit digital audio workstation controller with the familiar

interface of Tascam’s Portastudio that professionals have come to recognize

over the years. Essentially combining a hardware interface with

computer functionality, the plug-and-play US-428 interfaces with

Windows and Mac-based sequencing platforms via USB

without any additional cards to be installed.

The US-428 offers full control over any number of software

faders through eight hardware faders, groups of eight

software faders selectable with buttons located beneath the

unit’s jog wheel. The control surface also supports transport, EQ and

control functions for sequencers and DAWs. The US-428 supports inputs of 16- or

24-bit resolution at 44.1 or 48 kHz, and stereo or mono, with four analog inputs and a S/PDIF

digital input. Two audio output channels also support 16- or 24-bit resolution in stereo or mono, and at 44.1 or 48 kHz. The

US-428 also comes bundled with a custom version of Steinberg’s Cubase VST recording/MIDI sequencing software.

Input Section

◆ There are four analog inputs and a stereo

S/PDIF input, any four of which can be

combined to record up to four simultane-

ous tracks via USB

◆ There are four Trim knobs with individual

signal present and overload LEDs (one for

each analog input) that ensure setting

proper input levels before recording.

Channel Section

◆ Eight Channel Faders send continuous

controller information to the current bank

of eight faders delegated by the Bank select

buttons. Each of the eight channels has its

own Mute/Solo, record-ready and channel

select switches with status LEDs.

◆

Master Fader controls the level going to the

stereo bus output, and/or sends MIDI

controller information to the host software.

◆ Dedicated Transport and Locate controls

provide one-button access to the correspon-

ding on-screen transport controls of your

host application.

◆ Four Aux Send buttons with status LEDs

access the corresponding Aux Send in your

software and are controlled using the

Datawheel

◆ The Datawheel also acts as a continuous

controller for a variety of functions such as

a shuttle wheel, moving the transport in the

direction the wheel is turned.

◆ Dedicated EQ module controls the currently

selected channel of your audio recording

program and has continuous controllers for

level, frequency and Q as well as selector

buttons that access the four available EQ

bands (High, Hi-Mid, Lo-Mid and Low)

◆ The Pan control allows left/right panning of

the currently selected track

◆ The left and right Bank Select keys gives you

unlimited access to successive banks of eight

faders that control the corresponding chan-

nels in the software’s internal mixer

◆ When changing to a different bank of

faders, the Fader Null switch allows you to

move the corresponding channel fader,

using the Rec and Sel LED’s as up/down

guides until the US-428’s fader matches the

fader in the software’s internal mixer.

◆ The Input Monitor switch allows you the

Fader and Mute switches for channel’s 1-4

to control the level of four analog inputs

A,B,C and D to the US-428’s stereo outputs.

This is useful for monitoring the analog

inputs with zero latency while recording.

The Master Section

FEATURES

◆ Two balanced XLR Mic/1/4˝ TRS line inputs

◆ Two unbalanced 1/4˝ inputs switchable from Mic/Line to HiZ

for direct connection of a guitar or bass

◆ Coaxial S/PDIF digital I/O, US-428 to USB interface

◆ 1/4˝ headphone output, stereo analog monitor outputs (RCA)

◆ Two independent 16 channel MIDI inputs and output

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 86 87

Comentarios a estos manuales

Sin comentarios

Ulead PYRO1394DV Especificaciones Pagina 53

Comentarios a estos manuales