Ulead MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR DESIGNER Especificaciones Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 165
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
Operating Manual MA VPU V 6.0
MA Lighting Technology GmbH Dachdeckerstr. 16 D-97297 Waldbüttelbrunn www.malighting.dePage 28
2.7 EDID Manager
Extended Display Identification Data exchange is a standardized means for a display to
communicate its capabilities to a source device. It enables the VPU to know what kind of
monitor is connected. The EDID includes manufacturer name and serial number, product
type, phosphor or filter type, timings supported by the display, display size, luminance data
and (for digital displays only) pixel mapping data.
Unfortunately some LED walls offer no EDID data, so the VPU software cannot offer the
correct resolution and refresh rates. Or if a monitor is reconnected the right resolution and
refresh rate has to be set again.
To avoid these troubles the DVI outputs of the VPU have been equipped with additional
hardware. An EDID Chip offers the common resolutions and refresh rates to the VPU
hardware.
The switch near the DVI OUT connector lights blue
if EDID is simulated.
Monitor
Video Signal
EDID Signal
EDID Chip
EDID
ON
DVI OUT n
grandMA VPU
640 x 480 50 Hz
:
1920 x 1080 60 Hz
:
Note:
If VPU is turned on and only output 2 is connected (EDID signal found) this output gets the
logical output 1. If now a second monitor is connected to output 1 (or EDID 1 is switched on)
this will be assigned to logical output 2. This situation can be undone if VPU is restarted with
only on monitor (or EDID signal on) on output 1.
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 164 165

Comentarios a estos manuales

Sin comentarios