
Operating Manual MA VPU V 6.0
MA Lighting Technology GmbH Dachdeckerstr. 16 D-97297 Waldbüttelbrunn www.malighting.dePage 46
6 Quick Guide
This chapter gives a brief description how to operate with the MA VPU application.
6.1 Quickstart with grandMA1
– Start master session and connect to the desk:
To give you a sense of achievement MA VPU is delivered with a short demo file that can be
opened via t
manipulation.
If you carry out this example the video application starts a master session and transfers its
show to the connected desk or onPC.
Attention! Consider that the actual desk show will be overwritten if you carry out this
example.
For the following steps a grandMA desk or the grandMA onPC should be connected.
Without the connected desk, or onPC editor, you are able to do the setup where the used
pictures and videos are stored, but you cannot control the resulting output via the desk.
Start the connected desk or onPC with an empty show.
(Backup; Load Show; New Show)
Then start MA VPU.
or at the touchscreen
.
If no MA session is found, this is indicated by a red broken heart in the
status bar. Please Note: If you are not in a session or the master there
will be no output!
indicated by the blue heart.
Now you can invite the desk or onPC to the MA session
(grandMA 1 only; in grandMA 2 join the session from the desk):
- Network) and select the
Station (Desk or onPC). Invite the station by clicking the OK button.
Show data of MA VPU will be transferred to the desk.
This is signaled via a progress bar.
Comentarios a estos manuales